Simple, Cheap and Easy Project

This simple and easy project cost me about $2.50 for each
lamp. All you need to start with is ribbon, tassels and

a lamp shade.

First I started with cutting the ribbon for the tabs, 2.5 times

the lenght as the width of the ribbon. I folded and ironed

the tabs in half then I folded the top of both sides about

a 1/4 inch ( this is the part that will fold down into the

top of the shade). I hot glued the flaps to the shade.

Then I ran the ribbon through the tabs. For this look. I took

the tassel and hooked it to the ribbon. Brought a new look

to an old shade and a little something to the living room.

Next shade is designed a bit different. It has 6 pleaded

parts that go down the lenght of the shade so I went

with a different look for it.

Same ribbon, tassels just applied differently.

I had the shades, and the glue sticks so all I purchased was the

ribbon I liked and the tassels. Now I have a new look to the

shades. Took about 15 min. to finish off both shades.

Thanks for stopping in. Please leave a comment so I know

you have been here.

Pam